ùìåí îçôéøä ÷öøä áôåøåí ìà äòìéúé ãáø.
äàí îéùäå îëéø ,éåãò àå ùîò, òì î÷åí ùáå îú÷éðéí úöåâú äéìåê ìàåôðåòéí áàæåø äîøëæ?
úåãä
ùìåí îçôéøä ÷öøä áôåøåí ìà äòìéúé ãáø.
äàí îéùäå îëéø ,éåãò àå ùîò, òì î÷åí ùáå îú÷éðéí úöåâú äéìåê ìàåôðåòéí áàæåø äîøëæ?
úåãä
ãâí àåôðåò? ùðú ééöåø? äúäìéê ò÷øåðéú îàåã ôùåè, âí áäú÷ðä òöîéú.
äæåìéí éåúø òåáãéí òì îâðè , äàéëåúééí éåúø îúçáøéí ìù÷ò ãéàâðåæä ùì äëìé (åìëï çùåá ùâí äëìé) åàôùø ìäæîéï îäàéðèøðè åìäøëéá ìáã .
îðéç ùëì çðåú îëåáãú áúçåí ðåúðú àú äùéøåú äð"ì
Sent from my ONEPLUS 3T using Tapatalk
áæîðå çéôùúé áàøõ, ìà îöàúé. ÷ðéúé áebay 35$
âí àðé áæîðå ÷ðéúé ì- WR ùìé.
øàéúé ñøèåï äú÷ðä áéåèéåá åòùéúé àú æä ìáã... áî÷øä ùìé æä äéä îàåã ôùåè.
äáòéä äéà öøéëéí â'÷ àîöò àå îùäå ãåîä ëé öøéëéí "ìúëðú" àú ääéìåëéí ò"é ùéìåá ääéìåê å÷éöåø ëáì åæä ìà îòùé úåê ëãé ðñéòä- ìîøåú ùæä îöåééï áãó äîöåøó áúåê àåôöéä.ðëúá áî÷åø òì éãé ÷å÷åøé÷å ðâã ÷åôé÷å
ëîå ùKHC ëúá úöåâú äéìåëéí ðåøîìéú îúçáøú ìàåôðåò àå ãøê äãéâðåñèé÷ä àå ãøê çéáåø éùéø ìçééùï ääéìåëéí ëëä ùàí äàåôðåò äåà îòì àéæåø ùðú 2002 àéï öåøê "ìúëðú" ëìåí.
àðé îáéï ùëáø ÷ðéú "æáì ñéðé" ùãåøù çéúåê öîåú, òãééï ìà îàåçø ìúú àú æä îúðä ìîéùäåà åìäæîéï îùäåà èåá
âí áàìä ùîúçáøéí éùéøåú ìãéàâðåñèé÷ä éù úäìéê ùì ìéîåã äöâ ò"é äòìàú äéìåëéí
îåæø ìîä öøéê ìúëðú ëé äåà ìà òåùä çéùåá ùì ñì"ã åîäéøåú äåà ôùåè ÷åøà éùéøåú áàéæä äéìåê äàåôðåò ðîöà.
àðé îðéç ùâí ëàï ëðøàä éù îåöøéí âðøéí ùãåøùéí äúàîä àìå ùì çáøú Healtech òåáãéí îòåìä îðñéåï åùååä ìäåñéó òåã ëñó ëãé ì÷áì îåöø ùúôåø ìàåôðåò ùìê
öéèåè îàúø HEALTECH
PLUG ‘N PLAY, Hassle free set-up!
There are no buttons, no “programming wires”. The unit is fully automatic.
There’s no need to cut and splice wires, and no need to access several connectors. You only need to connect ONE plug under the seat – it can’t get any easier than this.
àåìé áúéàåøéä æä öéèåè îúåê Glpro:
Setup
You need to setup this module after installation. Perform the setup only when the
engine is WARM so the idle speed is normal.
- Find a long, straight road with light traffic. The unit does not learn the same
gear twice, this makes it easy to set up on the road. You can even shift down
and stop during the setup if needed. Do not steer the display, watch the road
and ride with extreme care as always!
- Turn the ignition On. The display counts backwards (6 to 1) indicating
that the memory is clear.
- When “L” is flashing, start the engine in Neutral and let the engine idle.
- When the display is flashing “1”, select first gear, release the clutch and
start riding normally.
The display is blinking faster while the unit is learning the gear.
- When the display shows “n” (next), select second gear.
Repeat this process until all gears are thought.
In top gear, wait until “o” (over) is indicated and the display stops
blinking.
The unit is now programmed and should indicate all gears correctly.
When ignition is turned on, the display counts forward (1 to 6) indicating that it
is programmed and fully functional.
éëåì ìäéåú ùäí ôùåè îééöøéí îùäå ëììé ùîúàéí ìøåá äàåôðåòéí, ìëï öøéê ìäëðéñ àú éçñ äòáøä (áàîöòåú ùéìåá ääéìåê) éãðéú.
äéä ìé àú äãâí äéùï ùìäí ùäúçáø ìçééùï ääéìåëéí, äéä ôìàâ àðã ôìéé áìé ùåí ìéîåã, îòðééï àéæä îéãò äîòøëú äçãùä äæàú î÷áìú îäôìàâ ùì äãéàâðåñèé÷ä.
øëéáä ÷öøä áëáéù îñôé÷ àøåê ò"î ìäòìåú àú ëì ääéìåëéí áöåøä îãåøâú àçú ìëîä ùðéåú ììà òöéøä /äåøãú äéìåê, åäîëùéø îëåéì.
ìôçåú àöìé æä äéä ëëä, äöâ îäáäá åîñîï ìê ìäéùàø áäéìåê äðåëçé, áñéåí îòìéí äéìåê åîîúéðéí ùåá ìäôñ÷ú ääáäåá, ëê òã ñéåí ëì äîäìê.
áçéé ùæä ôùåè, áæáæúé éåúø æîï òì ÷åñîèé÷ä ùì äñì÷ú çéååè.
Sent from my ONEPLUS 3T using Tapatalk
áéìáìúí àåúé éù áàøõ îéùäå ùîú÷éï àú äöâ àå ìà? àí ëï èìôåï ëúåáú åëå...
ìà îòåðééï ìäøëéá ìáã.
úåãä
àí ú÷ðä ìáã, ëì îåñê éú÷éï ìê (ìãòúé)
äøùàåú ôøñåí
öéèåè ääåãòä áúâåáä