çáøéí, éøãúé îäæéåó. ëùàâéò ìáð÷å÷ àçôù î÷åí ùîùåå÷ îòøëåú î÷åøéåú. îä ìâáé äùàø? ÷øáåøèåø åëå'...
Sent from my X9006 using Tapatalk
éãéãé àì úôâò àáì æä ùàúä áåçø ì÷ðåú áîçéøéí ääæåééí ùáàøõ æä áçéøä ùìê áìáã, îòáø ìæä îä ùìà éåãòéí ìà ëåúáéí.
àúä îééòõ ìå ì÷ðåú áàøõ áâìì ú÷éðä åîöã ùðé àúä ëåúá áàåôï ëììé ëé àúä ìà éåãò îä ãøéùåú äú÷éðä áàøõ ìàâæåæ. ìöåøê äòðééï ëì îä ùàâæåæ öøéê ëãé ìäëðñ ìàøõ æä ìäéåú çãù (îùåîù ìà ðëðñ) åäèáòú äàåú E òìéå, ùîééöâú ú÷ï àéøåôàé ìùéîåù çå÷é áëáéù. àí äåà äéä îåöà àâæåæ ëæä ùí (åàéï ñéáä ùìà - âí áúàéìðã éù æéåó åéù î÷åøé úìåé îä àúä îçôù), äéä øåëù åîáéà àåúå àéúå ìàøõ ìà äéúä ìå ùåí áòéä áùåí öåøä. éåúø îæä, ëîòè áèåç ùáëìì ìà äéå îãáøéí àéúå òì äàâæåæ áîëñ àí äåà äéä îáéà àåúå ëîå ùúëðï àéúå áîæååãä.
ðòøê ìàçøåðä òì éãé Shasha127; 10-12-2016 áùòä 18:13.
çáøéí, éøãúé îäæéåó. ëùàâéò ìáð÷å÷ àçôù î÷åí ùîùåå÷ îòøëåú î÷åøéåú. îä ìâáé äùàø? ÷øáåøèåø åëå'...
Sent from my X9006 using Tapatalk
ôòí øàùåðä ùàðé ùåîò òì ãåãéí òí îòèôú çéöåðéú îñåîøøú, çùáúé ùøéúåê æå äàåôöéä äéçéãä.
äâìéì îøåúê àáì äáñéñ åäñåâø á÷öä îñåîøøéí âí áàâæåæéí é÷øéí, áî÷åøééí àëï àéï ùéîåù áîñîøåú
îñåîøø îìôðéí åîàçåø, áðéä ÷ìàñéú ùì àâæåæ çìéôé
http://images1.revzilla.com/product_...6/leo_alum.jpg
æä ãåå÷à øòéåï ìà øò, àôùø ìôúåç àú äãåã åìäçìéó ùí àú äáéãåã àå àú äöéðåø äîçåøø, àí øîú äñîøåø åäçéáåø îàôùøéí àèéîä èåáä ìàåøê æîï àôùø ìäàøéê àú çéé äàâæåæ ìëì çéé äàåôðåò.
æàú áòéä, äèéèðé÷ èáòä áâìì îñîøåú áàéëåú âøåòä.
äøâúí úáðàãí. àí àúä îåöà àâæåæ ùîøâéù ìê àéëåúé åìà ôç àæ ÷ðä åúúçãù. î÷ñéîåí ìà úàäá åúîëåø.
åúáãå÷ ÷åèø öðøú áãøåæé àçøú it wont slip on.
æä ðëåï àáì ìà äñéáä äéçéãä, îñîøåú áàéëåú âøåòä áàçã ä÷èòéí äôðéîééí äéä çì÷ îùøùøú äñéáåú ùäåáéìå ìèáéòä,
àí àçú îäï äéúä îðåèøìú äñôéðä ìà äéúä èåáòú.
âí äñéîøåø áàåúå ÷èò ÷òåø ðòùä áàåôï éãðé ìà îñô÷ ëé ìà äéä àôùøé ìäùúîù áöéåã ääéãøàåìé äîñåøáì ùí.
âí àí ìà äéä ðéúï ìîðåò àú äèáéòä, àôùø äéä ìäöéì àú øåá äðåñòéí àéìåìà äñôéðä ìà èáòä ëì ëê îäø
http://www.dailymail.co.uk/sciencete...ank-liner.html
in their book What Really Sank The Titanic, the metal experts contend the vessel’s manufacturer, Harland and Wolff, was under great pressure to secure enough iron to make three million rivets to stitch the ship’s metal plates.
In the rush to beat competition from Cunard, the White Star liner was supplied with a vessel that was made using substandard materials.
McCarty and Foecke tested 48 rivets recovered from the wreck and found they had high levels of slag, a result of smelting that can make the iron brittle. If put under intense pressure, the rivets made from it would have been liable to splinter.
Dr Corfield said: ‘Foecke and McCarty found that the rivets that held the mild-steel plates of the Titanic’s hull together were not of uniform composition or quality and had not been inserted in a uniform fashion.
‘Specifically, Foecke and McCarty found that the rivets at the front and rear fifths of the Titanic were made only of ‘best’ quality iron, not ‘best-best’, and had been inserted by hand.
‘The reason for this was that, at the time of the Titanic’s construction, the hydraulic presses used to insert the rivets used in the middle three fifths of the ship could not be operated where the curvature of the hull was too acute (i.e. at bow and stern).’
Titanic was designed to stay afloat if up to four of its sealed compartments were flooded. But so many of the rivets popped along the starboard side of the ship that a fifth compartment flooded, condemning the vessel to the depths.
The Oxford based aithor said James Cameron, director of the film Titanic, seems clear it was the ‘rivets that were at fault’.
He said: ‘If you look at the relevant section of his film, at about 100 minutes in, you will see the bulkheads being split asunder along the line of rivets, which pop like champagne corks into the interior of the vessel.’ This sequence is ‘spot on in terms of accuracy’.
Dr Corfield says as well as the actual make-up of the ship, the climate thousands of miles away from where the ship actually sunk may have had a hand in events.
éëåì ìäéåú ùòáåøëí ø÷ äèåá áéåúø åø÷ èéèðéåí úòåôúé îëåøñí á-CNC òí 5 öéøéí éâò áàåôðåò äà÷æåèé ùìëí, àáì áùáéì èø÷èåø ãå"ù ëì ôçéú úòùä àú äòáåãä éåôé. äøáä îòáø ìáéöåòéí éù ôä òðééï ùì ñàåðã ìãòúé.
îëéøéí àú äàâæåæé à÷øôåáéõ á-20$ îòìéà÷ñôøñ? çôùå ÷öú áøùú àúí úåôúòå ìâìåú ùäí áðåééí éåúø èåá îîä ùðãîä ìëí. òí ÷øáåï àîéúé åäëì. éåãòéí ìîä? ëé áñåôå ùì ãáø ëîå ùãøæãðø äéèéá ìúàø "÷ç âìéì îôç ëîä ôé÷éí åäåôä àâæåæ."
æä ãå"ù áñéñé ìà àåôðåò ñåôøáéé÷.
àðé îáéï àú äöòú äòøê ùì çáøåú äáåèé÷ òì ôðé äúçøåú, àáì àðé âí îáéï àú äòáåãä ùì îçì÷åú äùéåå÷ äðäãøåú ùäôëå àúëí ìëàìä öãé÷éí âîåøéí.
æå ãòúé - ÷ðä åúúçãù.
ðòøê ìàçøåðä òì éãé àRðé; 14-12-2016 áùòä 15:06.